Friedrich US08B10A User Manual download pdf (Page 7)

Figure 7

—7—

2.2 AIR HANDLING PARTS

2.2.1 ORIFICE, AND TURBO FAN

1. Remove the front grille. (Refer to section 2.1.1)

2. Remove the cabinet. (Refer to section 2.1.2)

3. Remove the 2 screws which fasten the

evaporator at the left side and the right side.

(See Fig. 4)

4. Move the evaporator to the side carefully.

5. Remove the orifice. (See Fig. 5)

8. Using handheld pliers, remove the clamp which

secures the turbo fan. (See Fig. 6)

9. Remove the turbo fan with pliers or your hand,

without touching blades. (See Fig. 7)

10. Re-install the components by referring to the

removal procedures, above.

2.2.2 FAN

1. Remove the cabinet. (Refer to section 2.1.2)

2. Remove the brace.

(Refer to section 2.2.1)

3. Remove the 7 screws which fasten the condenser.

4. Move the condenser to the side carefully.

5. Using handheld pliers, remove the clamp which

secures the fan.

6. Remove the fan. (See Fig. 8)

7. Re-install the components by referring to the

removal procedures, above.

Figure 4

Figure 5

Figure 6

Figure 8

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

No comments

Friedrich US08B10A User Manual Page 7