Friedrich EQ08 User Manual download pdf (Page 9)

920-197-01

STEP 1 After removing the unit fromshipping carton,removetapeholding

decorative front in place. Lay front in a safe out-of-the-way place,

then slide chassis out of cabinet (see Figure A, page 7).

STEP 2 Remove the shell channel from the top of the cabinet (see Figure

B, page 7).

NOTE: Notapplicabletoheatpumpmodelssoldwithoutquick

mounting cabinet.

STEP 3 LAYOUT - Cut and frame in an opening in the desired wall area

using the illustration as a guide (see Figure F).

STEP 4 Place the cabinet in the framed opening.

NOTE: Measure and shim void spaces between the side of

cabinet and wood framing before securing to wall.

EXPANSION ANCHOR BOLT

MOLLY OR TOGGLE BOLT

STEP 5 Position the front edge to extend into the room 3/4" minimum at

top of cabinet and 1" minimum at bottom (see Figure G).

STEP 6 Secure each side of the cabinet with No. 8 x "hexheadscrews

(item #3, page 6) or nails through the holes in the sides.

NOTE:ALTERNATE FASTENERS WHICH MAY BE USED FOR

SECURING THE UNIT CABINET TO A WALL, INCLUDING

MASONRYWALLS,ARENOTFURNISHED(AVAILABLEAT

LOCAL HARDWARE STORES).

Thru-the-wall installations

Falling Object Hazard

Not following Installation Instructions

for mounting your air conditioner can

result in property damage, injury, or

death.

WARNING

Figure F

FINISHED OPENING SIZE

2" x 8" FRAME

20"

14 ¼"

20"

NOITCURTSNOCEMARFNOITCURTSNOCKCOLBETERCNOC

Figure G

¾" MINIMUM

CABINET FRONT

1" THICK LUMBER

1" MINIMUM

INSIDE WALL

EXTERIOR WALL

TRIM AROUND THE CABINET

WITH A SUITABLE WOOD

MOULDING AND FINISH TO SUIT.

CAULK ALL AROUND CABINET

ON OUTSIDE TO INSURE A

WEATHER TIGHT SEAL.

¼" SLOPE

DOWN. POSITION AND

SECURE CABINET

DOWNWARD. SLOPE

OUTSIDE FOR DRAINAGE.

MAX. WALL

THICKNESS

ALLOWED 8 ½"

FRONT EDGE OF LOUVERS

MUST ALWAYS BE OUTSIDE OF

EXTERIOR WALL SURFACE

¾" MINIMUM FRONT

EDGE OF CABINET TO

INSIDE WALL SURFACE.

" SLOTTED HEAD SCREWS (3 EA. SIDE)

NAILS MAY BE USED IF DESIRED.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Friedrich EQ08 User Manual Page 9

Comments to this Manuals

Related products and manuals for Unknown Friedrich EQ08