Friedrich Heat Pump 920-087-09 User Manual download pdf (Page 14)

PXGA Standard Grille

Installation Instructions

1. Remove the center support and weatherboard if still installed in

the sleeve.

2. Insert six plastic grommets into the grille openings from the outside

of the grille as shown in Figure 13.

3. Insert two #8 x ⅜" sheet metal screws (provided) in the top two

outside edge plastic grommets, and tighten them half way into

the grommets.

4. Grasp the grille by the attached plastic handles. Position

it with the condensate drain knockouts facing down.

From inside the building, maneuver the grille through the wall

sleeve and pull toward you until the screw heads are inserted

into the keyhole slots at the top of the wall sleeve. Tighten the

two screws completely.

5. Insert the remaining screws into the remaining holes and tighten

securely.

Figure 13

Standard Grille

WARNING

Falling Object Hazard

Not following Installation Instructions for

mounting your air conditioner can result

in property damage, injury, or death.

FRP013

WALL SLEEVE

WEATHERBOARD

CENTER SUPPORT

STANDARD GRILLE

PLASTIC HANDLES

PLASTIC GROMMETS

WALL

SLEEVE

STANDARD

GRILLE

#8 x 3/8”

SHEET METAL

SCREW

Description

Stamped Aluminum Grille

Plastic Grommets

#8 x " Sheet Metal Screws

Quantity

PXGA Standard Grille

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments

Friedrich Heat Pump 920-087-09 User Manual Page 14

Comments to this Manuals

Related products and manuals for Split-system air conditioners Friedrich Heat Pump 920-087-09