Friedrich Heat Pump 920-087-09 User Manual download pdf (Page 24)

System Configuration

Fresh Air Vent Control

The vent control lever is located on the left side of the unit, behind the

front panel.

NOTE: The vent door shipping hardware must be removed before

using the vent control lever. See page 17, Figure 21, (Remove

Shipping Screw from Vent Door if present).

When vent door is set to CLOSE, only the air inside the room is circulated

and ltered, See Figure 28.

When vent door is set to OPEN, some outdoor air will be drawn into room.

This may reduce heating or cooling efciency.

Adjusting Air

To adjust air direction:

1. Remove front panel. See Figure 22.

2. Remove louver screws that hold louver insert in place (from back

side of front panel). See Figure 29.

3. Turn louver insert and rotate 180°. See Figure 30.

4. Replace louver insert.

5. Replace screws and front panel.

FRP025

VENT CONTROL

(Pull lever through

label to operate)

CLOSED

OPEN

Figure 28

Air Vent Control Location

FRP026

LOUVER SCREWS

Figure 29

Backside of Front Panel

FRP027

AIR DISCHARGE UPWARDAIR DISCHARGE OUTWARD (Default)

Figure 30

Adjusting Louvers

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

No comments

Friedrich Heat Pump 920-087-09 User Manual Page 24